SHARP 15 1912 ., . "". 1915 . " " , . 1923 . . , Haykawa Metal Works, - Sharp Corparation.

1925 . , , . , . , SHARP. , SHARP .

1926 . , . 1951 . , 1952 . RCA. SHARP TV3-14T.

1952 . . 1961 . .

    



Sharp SG-1HX
   


: 1981


Specifications
General Description
Power source: 110/220/240 Volt, 50Hz or 60Hz
Power consumption: 160W
Semiconductor: 11-ICs (Integrated circuit)
20-Transistors
1-FET
20-Diodes
16-LEDs (Light Emitting Diode)
Dimensions: Width; 428mm
Height; 385mm
Depth; 360mm
Weight; 14,5 kg
Audio section
Music power output: 2 x 35w /4 ohms
Continuous power output: 2 x 20W/4 ohms
Frequency response: 30Hz-25kHz (—3dB)
Input sensitivity and input impedance:
Mic; 2mV, 10k ohms
AUX; 220mV, 22k ohms
Phone over load: 130mV (RMS, 1kHz, 0.3% THD)
Tone control effect: Bass; ±10dB at 100Hz
Treble; ±10dB at 10kHz
FM section
Frequency coverage: 87.6 — 108MHz
Queting sensitivity: 2
μV (40K Hz deviation, S/N = 26dB)
Image rejection: 42dB (at 98MHz)
IF rejection: 75dB (at 98MHz)
Harmonic distortion: Mono; 0.7% Stereo; 0.9%
Stereo separation: 30dB
AM section
Frequency range: LW; 150—370kHz
MW; 520-1620kHz
Usable sensitivity:
LW; 250μV/m (with bar aerial)
MW; 300
μV/m (with bar aerial)

Harmonic distortion: 1.5%
Tape-deck
Tape: Philips standard compact cassette tape
Tape speed: 4.8cm/sec
Wow and flutter: 0.25% (DIN standard)
Frequency response: Metal tape; 50Hz
~ 15kHz
Cr02 tape; 50Hz
~ 14kHz
Normal tape; 50Hz ~ 12kHz
Signal-to-Noise ratio: 60dB (Cr02 tape, Dolby N.R.: ON)
Record Player
Type: Belt driven. Semi-automatic
Speed: 33-1/3 and 45 r.p.m.
Tonearm: Statically balanced
Cartridge: Magnetic type
Motor: 4-poles, synchronous
Wow and Flutter: 0.2%


: 19.08.2012 18:31:58
: 10.06.2013 20:20:30
sharp sg 1hx
: 02.12.2014 16:04:33
SG-1HX, .
- : 02.12.2014 21:47:42
50
: 19.11.2016 16:37:18
, .

*:   E-mail:  
:
CAPTCHA    
2004-2014. recallsharp.ru .